Discontinued products


An insulation testing unit AID-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 70 kV at 50Hz frequency.


Oil breakdown voltage tester UIM-90M is designed for determining the breakdown voltage of the transformer oil and other liquid dielectrics in accordance with GOST 6581-75 and other standards.


Digital impulse reflectometer RIF-7 is designed for determining the distance to a fault in communication and power cables.


Very low frequency tester for high voltage cables VLF-25 is designed for testing the insulation of the high voltage cross-linked polyethylene (XLPE) cables.


Very low frequency tester for high voltage cables VLF-60KP is designed for testing high voltage cables and other objects which exhibit a significant isolation capacitance, with very low frequency voltage with an amplitude value of up to 60 kV.


Test Stand SVS-12A is designed for acceptance and operation of electrical test determination KharkovEnergoPribor Ltd.


Universal insulation breakdown tester UPU-10 is designed for testing the insulation properties of the electrical equipment with an AC sinusoidal voltage of 50 Hz frequency.


An insulation testing unit AID-70/70 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 70 kV at 50Hz frequency.


High Voltage burning unit SVP-05C is designed for burning (destroying the soldered joint with resistance close to zero, in the point where a high voltage cable core short circuits to the shell or another core) the defective insulation of power cables..


Very low frequency tester for high voltage cables VLF-120KP is designed for testing high voltage cables and other objects which exhibit a significant isolation capacitance, with very low frequency voltage with an amplitude value of up to 120 kV.


MDLT-50 measures both dielectric dissipation factor and capacitance at 50 kV RMS using both straight and reversed connections.


Universal insulation breakdown tester UPU-6 is designed for testing the insulation properties of the electrical equipment with an AC sinusoidal voltage of 50 Hz frequency, as well as with rectified voltage between 0-6 kV of the negative polarity.


Diode rectifier VP-300 is designed for disintegration a soldered connection point where cable's lead vein is short-circuiting with the sheath.


XLPE cables sheath tester UPZ-80-10 is designed for testing the sheath of cables made of cross-linked polyethylene (XLPE), as well as preliminary and accurate location of the sheath faults.


XLPE cables sheath tester UPZ-80-5 is designed for testing the sheath of cables made of cross-linked polyethylene (XLPE), as well as preliminary and accurate location of the sheath faults.


Calibration test van ETPL-110-35S is a combination of testing equipment mounted in a van and designed for calibration and metrological certification of voltage transformers in areas of their operation according to the requirements.