REFERENCE VOLTAGE MEASUREMENT CELL
Cells C-80 and C-100 are used as reference voltage meters during calibration and adjustment of the OLT-series testers.
Bright LED display shows the measured values of voltage, frequency and amplitude coefficient of the signal.
Wireless coupling with a PC via an infrared interface allows an operator to remain on a safe distance away from the high voltage source when calibrating or adjusting C-80 (C-100).
The proprietary KEP Suite software makes the adjustment of the cell fast and simple.
Cells’ voltage measurement range correspond to the full operating voltage output range of the OLT-series testers (up to 80 kV for C-80 and up to 100 kV for C-100).
Cells C-80 and C-100 complete with a set of accessories are supplied in compact shock-resistant case.
|Metering parameters||Measured and indicated parameters||
■ Crest factor
|Voltage measurement range||10 … 80 kVRMS||10 … 100 kVRMS|
|Relative voltage measurement error||± 1 %|
|Voltage indication resolution||0.01 kV|
|Frequency measurement range||45 … 65 Hz|
|Frequency indication resolution||0.01 Hz|
|Crest factor indication resolution||0.01|
|System parameters||Input resistance||800 MΩ||900 MΩ|
|Interfaces||Display||2 segments, 4 characters each|
|Connection interfaces||IrDA port (PC connection)|
|Power supply and consumption||Internal rechargeable battery||3.7 V, LiPo|
|Battery life *||up to 4 h|
|External power source voltage||9 … 12 VDC|
|Current consumption when powered from external power source (@ 12 VDC)||up to 50 mA|
|Physical||Compatible electrode spacing||221 mm||273 mm|
|Dimensions, H × W × D||91 × 275 × 81 mm||91 × 327 × 81 mm|
* Battery life depends on many other factors; actual results may vary. Battery recharge cycle count is limited.