HVTS-70/50

PORTABLE HIGH-VOLTAGE TEST SYSTEM

Portable system HVTS-70/50 is designed for carrying out high-voltage withstand testing of cable insulation and other dielectrics with DC (rectified) voltage up to 70 kV and AC voltage up to 50 kVRMS at industrial frequency (f = 50 Hz).

The system can be used for both field and laboratory testing.
Hvts 70 50  04  699x477
Hvts hp ac dc  1200x831 2

VERSATILITY

The system features both DC (rectified) and AC output voltage modes, which allows testing electrical equipment according to various standards using only HVTS-70/50 system.

Output voltage mode is selected by pressing a button on the control unit - no additional equipment installation such as rectifier etc. is required.

MANUAL AND AUTOMATIC CONTROL MODES

The system allows to carry out tests in both fully automatic and manual control modes.

In the manual mode, the output voltage level and ramp up rate are controlled by the operator via a rotary encoder.

In the automatic mode, the test voltage is automatically increased at pre-defined ramp up rate and is held on the required level before being reduced to zero upon completion of the test cycle.

Switching between control modes is done by simple push of a button.

Hvts 70 50 cu6 1200x831

DIGITAL CONTROL

HVTS-70/50 systems feature a digital graphic display indicating all the test settings and operating parameters.

A graphical menu provides such advantages as multilingual user interface, test reports viewing, saving test pre-sets, etc.


Hvts 70 50 panel 1200x294


Hvts 70 50 komponovka 01 1200x831


TWO-MODULE DESIGN

The system comprises of two separate modules: the control unit and the high-voltage unit.

The test process is controlled from the control unit while an object under test is connected to the high-voltage unit.

Such two-module design allows an operator to remain at a safe distance away from the high-voltage circuit and the object under test.





Hvts 70 50 komponovka 02 edit

Hvts 70 50 ekran 1200x831

TEST REPORTS STORAGE

Detailed results of each test are saved in the non-volatile memory of the system.

Test reports can be viewed from the control unit’s display.

BUILT-IN DISCHARGE DEVICE

The high-voltage unit is equipped with a short-circuiter – an auxiliary protective device for removing residual voltage from an object under the test and the high-voltage circuit of the system.

Hvt 70 50 zamykatel 02 1200x831 edit
Hvts 70 50 kompakt 1200x831

PORTABLE TEST SYSTEM

Small weight, compact size and portable design of both units of the system enable rapid deployment, quick reconnection and operational comfort during the field testing.

The system can be supplemented with a convenient trolley for easy transportation.

OIL INSULATION

The high-voltage unit contains a step-up transformer with oil insulation which works reliably under almost any conditions and does not require extra care or special maintenance.

Hvt 70 50 vv 00 1200x831 edit
* Pictures used herein are for illustration purposes only. Products' specifications are subject to change without notice. *


Related products

HVT-70/50 – Portable high-voltage test system
HVTS-HP series – Mobile high-power high-voltage test systems
VLF-60 – Portable high-voltage VLF test system
UIG series – Resonant testers
OLT series – Automatic insulating oil dielectric strength testers
We use cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. Learn more